Drawing the straps

All we have to do now is flip a bunch of points on the other side, and create one single path that follows our bib outline.

And as we now have one path to draw the bib, we can (and should) remove the earlier paths we drew to see what we are doing.

The round macro we added earlier is still required to calculate the points we need to construct the half-circle. But we don’t want it to draw the half-circle path. As it happens, that is the default behaviour, so we merely have to remove it’s hidden: false property.

mjs
design/src/bib
function draftBib({
  Path,
  Point,
  paths,
  points,
  measurements,
  options,
  utils,
  macro,
  part,
}
) {

  /*
   * Construct the neck opening
   */
  const target = (measurements.head * options.neckRatio) / 4
  let tweak = 1
  let delta
  do {
    points.right = new Point(tweak * measurements.head / 10, 0)
    points.bottom = new Point(0, tweak * measurements.head / 12)

    points.rightCp1 = points.right.shift(90, points.bottom.dy(points.right)/2)
    points.bottomCp2 = points.bottom.shift(0, points.bottom.dx(points.right)/2)

    paths.quarterNeck = new Path()
      .move(points.right)
      .curve(points.rightCp1, points.bottomCp2, points.bottom)
      .hide() // Add this line

    delta = paths.quarterNeck.length() - target
    if (delta > 0) tweak = tweak * 0.99
    else tweak = tweak * 1.02
  } while (Math.abs(delta) > 1)

  // Construct the complete neck opening
  points.rightCp2 = points.rightCp1.flipY()
  points.bottomCp1 = points.bottomCp2.flipX()
  points.left = points.right.flipX()
  points.leftCp1 = points.rightCp2.flipX()
  points.leftCp2 = points.rightCp1.flipX()
  points.top = points.bottom.flipY()
  points.topCp1 = points.bottomCp2.flipY()
  points.topCp2 = points.bottomCp1.flipY()  

  /* Remove this path
  paths.neck = new Path()
    .move(points.top)
    .curve(points.topCp2, points.leftCp1, points.left)
    .curve(points.leftCp2, points.bottomCp1, points.bottom)
    .curve(points.bottomCp2, points.rightCp1, points.right)
    .curve(points.rightCp2, points.topCp1, points.top)
    .close()
    .addClass('fabric')
   */


  // Drawing the bib outline
  const width = measurements.head * options.widthRatio
  const length = measurements.head * options.lengthRatio

  points.topLeft = new Point(
    width / -2,
    points.top.y - (width / 2 - points.right.x)
  )
  points.topRight = points.topLeft.shift(0, width)
  points.bottomLeft = points.topLeft.shift(-90, length)
  points.bottomRight = points.topRight.shift(-90, length)  

  /* Remove this path
  paths.rect = new Path()
    .move(points.topLeft)
    .line(points.bottomLeft)
    .line(points.bottomRight)
    .line(points.topRight)
    .line(points.topLeft)
    .close()
    .addClass('fabric')
   */


  // Shape the straps
  points.edgeLeft = new Point(points.topLeft.x, points.left.y)
  points.edgeRight = new Point(points.topRight.x, points.right.y)
  points.edgeTop = new Point(0, points.topLeft.y)

  points.edgeLeftCp = points.edgeLeft.shiftFractionTowards(points.topLeft, 0.5)
  points.edgeRightCp = points.edgeLeftCp.flipX()
  points.edgeTopLeftCp = points.edgeTop.shiftFractionTowards(
    points.topLeft,
    0.5
  )
  points.edgeTopRightCp = points.edgeTopLeftCp.flipX()

  // Round the straps
  const strap = points.edgeTop.dy(points.top)

  points.tipRight = points.edgeTop.translate(strap / 2, strap / 2)
  points.tipRightTop = new Point(points.tipRight.x, points.edgeTop.y)
  points.tipRightBottom = new Point(points.tipRight.x, points.top.y)

  /*
   * Macros will return the auto-generated IDs
   */
  const ids1 = {
    tipRightTop: macro("round", {
      id: "tipRightTop",
      from: points.edgeTop,
      to: points.tipRight,
      via: points.tipRightTop,      

      /* Remove this to have the macro
       * only create the points we need
       * and not draw a path
      hide: false
      */

    }),
    tipRightBottom: macro("round", {
      id: "tipRightBottom",
      from: points.tipRight,
      to: points.top,
      via: points.tipRightBottom,      

      /* Remove this to have the macro
       * only create the points we need
       * and not draw a path
      hide: false
      */

    })
  }

  /*
   * Create points from them with easy names
   */
  for (const side in ids1) {
    for (const id of ['start', 'cp1', 'cp2', 'end']) {
      points[`${side}${utils.capitalize(id)}`] = points[ids1[side].points[id]].copy()
    }
  }

  const rotateThese = [
    "edgeTopLeftCp",
    "edgeTop",
    "tipRight",
    "tipRightTop",
    "tipRightTopStart",
    "tipRightTopCp1",
    "tipRightTopCp2",
    "tipRightTopEnd",
    "tipRightBottomStart",
    "tipRightBottomCp1",
    "tipRightBottomCp2",
    "tipRightBottomEnd",
    "tipRightBottom",
    "top",
    "topCp2"
  ]
  while (points.tipRightBottomStart.x > -1) {
    for (const p of rotateThese) points[p] = points[p].rotate(1, points.edgeLeft)  }  

  /* Remove this repetition
  macro("round", {
    from: points.edgeTop,
    to: points.tipRight,
    via: points.tipRightTop,
    prefix: "tipRightTop",
    hide: false,
    class: 'contrast dotted',
  })
  macro("round", {
    from: points.tipRight,
    to: points.top,
    via: points.tipRightBottom,
    prefix: "tipRightBottom",
    hide: false,
    class: 'contrast dotted',
  })

  paths.rect = new Path()
    .move(points.edgeTop)
    .curve(points.edgeTopLeftCp, points.edgeLeftCp, points.edgeLeft)
    .line(points.bottomLeft)
    .line(points.bottomRight)
    .line(points.edgeRight)
    .curve(points.edgeRightCp, points.edgeTopRightCp, points.edgeTop)
    .close()
  */
  

  // Add points for second strap
  points.edgeTopRightCp = points.edgeTopLeftCp.flipX()
  points.topCp1 = points.topCp2.flipX()
  points.tipLeftTopStart = points.tipRightTopStart.flipX()
  points.tipLeftTopCp1 = points.tipRightTopCp1.flipX()
  points.tipLeftTopCp2 = points.tipRightTopCp2.flipX()
  points.tipLeftTopEnd = points.tipRightTopEnd.flipX()
  points.tipLeftBottomStart = points.tipRightBottomStart.flipX()
  points.tipLeftBottomCp1 = points.tipRightBottomCp1.flipX()
  points.tipLeftBottomCp2 = points.tipRightBottomCp2.flipX()
  points.tipLeftBottomEnd = points.tipRightBottomEnd.flipX()

  // Create one path for the bib outline
  paths.seam = new Path()
    .move(points.edgeLeft)
    .line(points.bottomLeft)
    .line(points.bottomRight)
    .line(points.edgeRight)
    .curve(
      points.edgeRightCp,
      points.edgeTopRightCp,
      points.tipLeftTopStart
    )
    .curve(
      points.tipLeftTopCp1,
      points.tipLeftTopCp2,
      points.tipLeftTopEnd
    )
    .curve(
      points.tipLeftBottomCp1,
      points.tipLeftBottomCp2,
      points.tipLeftBottomEnd
    )
    .curve(
      points.topCp1,
      points.rightCp2,
      points.right
    )
    .curve(
      points.rightCp1,
      points.bottomCp2,
      points.bottom
    )
    .curve(
      points.bottomCp1,
      points.leftCp2,
      points.left
    )
    .curve(
      points.leftCp1,
      points.topCp2,
      points.tipRightBottomEnd
    )
    .curve(
      points.tipRightBottomCp2,
      points.tipRightBottomCp1,
      points.tipRightBottomStart
    )
    .curve(
      points.tipRightTopCp2,
      points.tipRightTopCp1,
      points.tipRightTopStart
    )
    .curve(
      points.edgeTopLeftCp,
      points.edgeLeftCp,
      points.edgeLeft
    )
    .close()
    .addClass("fabric")


  return part
}
Creating a partAdding measurements